Mobilmet 400 Series
Oil Based Cutting Fluids
Mobilmet 400 Series are high performance, multi-service, non-corrosive straight cutting oils.
@sutaiyoสินค้า
| สินค้า | ISO VG | ดาวน์โหลด MSDS |
|---|---|---|
| Mobilmet 411 | - | |
| Mobilmet 414 | - | |
| Mobilmet 417 | - | |
| Mobilmet 423 | - | View MSDS |
| Mobilmet 424 | - | View MSDS |
| Mobilmet 426 | - | View MSDS |
| Mobilmet 427 | - | View MSDS |
Mobilmet 400 Series are high performance, multi-service, non-corrosive straight cutting oils. They are designed for light to moderate duty cutting operations and they are also suitable as machine tool lubricants and hydraulic oils, thereby eliminating problems of cross contamination of cutting oil and lubricant. They are formulated from high quality base oils and additives to provide effective machining performance in a wide variety of operations and be non-staining to both ferrous and non-ferrous metals during machining and subsequently. The oils are light-coloured and transparent so that the work area can be clearly seen at all times. They control the builtup edge and protect the tool tip from wear. They give improved surface finish that may eliminate the need for finish turning or forming before grinding. The improved dimensional accuracy resulting from the use of the Mobilmet 400 Series substantially reduces rejects due to off size or distortion during machining. The higher viscosity Mobilmet 420 series are formulated to prevent the formation of oil mist in the vicinity of the machine tool, thus contributing to a safer and more pleasant working environment. They are also chlorine-free.
Mobilmet 411 is recommended for machining aluminium, magnesium and copper alloys. It is particularly suited for deep hole drilling and similar high-speed operations where the oil is fed under pressure to the cutting area to wash out swarf and debris. It can also be used for high-speed, light feed machining of screw stock steels and as a lubricant for high-speed spindles. Mobilmet 423 and Mobilmet 424 may be used with all the metals covered by Mobilmet 411 and, in addition, they are recommended for steels and cast irons having a Brinell hardness up to 200. They can be used for severe cutting operations of difficult-to-machine non-ferrous alloys such as siliconcopper, silicon-bronze and copper-nickel. They are resistant to foaming, even with excess splashing so that superior performance is provided in the machine tool lubrication system. With relatively low pour points and high viscosity indexes they are not difficult to dispense in cold conditions and they provide adequate film strength in hot-running machine tool bearings under load. Mobilmet 426 and Mobilmet 427 are recommended for critical machining of non-ferrous metals and automatic operations on materials having a Brinell hardness up to about 300. They are versatile, wide-range products catering for most circumstances.
With their versatile machining applications and very good machine tool system lubrication capability, Mobilmet 400 Series have become a mainstay product to many operators.
Features and Benefits
The Mobilmet brand of cutting fluids has gained a well-deserved reputation for innovation and outstanding performance over the years.The Mobilmet 400 Series are an important member of this family with their multifunctional machining and lubrication capabilities. This approach, formulated by our research technologists, results in highly effective products that can meet the needs of a multitude of machine shop requirements.
Features and potential benefits of Mobilmet 400 products include:
|
Features |
Advantages and Potential Benefits |
|
Excellent machining capabilities |
Increased production resulting from longer tool life and reduced downtime for tool changes and wheel dressing |
|
|
Improved surface finish and dimensional accuracy resulting in fewer rejects and better quality finished products |
|
|
Feed rates and machine speeds may be increased with no adverse effects on tool life or other factors resulting in increased productivity |
|
Suitable for a wide range of ferrous and non-ferrous materials and machining operations |
Fewer cutting oils required due to wide range of application, with potential for reduced inventory costs |
|
|
No staining of slideways and machine tool fixtures |
|
Multi-service capability for machine tool lubrication and hydraulic systems |
Eliminates contamination problems and provides further inventory benefits |
|
Light, transparent colour |
Provides a clear view of the work area given at all times |
|
Reduction in oil mist (Mobilmet 420 Series) |
Help contribute to a safer and more pleasant working environment |
Applications
Mobilmet 400 Series oils are recommended for a wide range of machining operations on all types of metals. They can be used asmulti-purpose oils when a common fluid is required for machine tool lubrication and as a hydraulic fluid. Specific applications include:
- Mobilmet 411 is recommended for machining aluminium and magnesium and their alloys, copper, brasses and bronzes. It is particularly suited for deep hole drilling and similar high-speed operations. It can also be used for high-speed, light feed machining of screw stock steels and as a lubricant for high-speed spindles
- Mobilmet 423 and Mobilmet 424 may be used with all the metals covered by Mobilmet 411 and, in addition, they are recommended for steels and cast irons having a Brinell hardness up to 200. They can be used for severe cutting operations of difficult-to-machine non-ferrous alloys such as silicon-copper, silicon-bronze and copper-nickel. They are very effective lubricants for the machine tool lubrication system under a wide range of temperature conditions
- Mobilmet 426 and Mobilmet 427 are recommended for critical machining of non-ferrous metals and automatic operations on materials having a Brinell hardness up to about 300